Best Welding Helmets: Auto-Darkening Reviews (2026)
An auto-darkening welding helmet is the single most important piece of safety equipment you will buy as a welder. It protects your eyes from UV and infrared radiation, shields your face from sparks, and — unlike passive helmets — lets you see your workpiece clearly before striking an arc. No more flipping your hood up and down between tack welds.
This comparison weighs optical clarity, switching speed, sensor coverage, comfort, and low-amperage TIG sensitivity across budget, mid-range, and professional helmets. Here are the best options for every budget and welding process.
Quick Comparison: Best Welding Helmets
| Helmet | Shade Range | Switching Speed | Sensors | Viewing Area | Weight | Price Range | Best For |
|---|---|---|---|---|---|---|---|
| Lincoln Viking 3350 | 5-13 | 1/25,000 sec | 4 | 12.5 sq in | 22 oz | $250-300 | Best overall |
| Miller Digital Infinity | 2.5, 5-8 (cut), 8-13 (weld) | 1/25,000 sec | 4 | 13.4 sq in | 21.4 oz | $280-350 | Best for TIG |
| 3M Speedglas G5-02 | 2.5, 8-12 | 0.1 ms | — | 150 x 76 mm | 233 g helmet + 202 g filter + 100 g head band | $925-1,248 | Largest view |
| YesWelder LYG-M800HP | 4 (light), 5-9, 9-13 | Under 1/30,000 sec | 4 | 3.93 x 3.66 in | — | $80-110 | Best budget |
| Hobart 770890 | 9-13 | 1/25,000 sec | 4 | 9.3 sq in | 19.7 oz | $60-80 | Budget entry |
| Lincoln Viking 1840 | 7-13 | 1/25,000 sec | 4 | 3.78 x 1.85 in | 19.5 oz | $100-130 | Mid-range value |
Best Auto-Darkening Helmet for Beginners
A first helmet has one job before any other: darken reliably on every arc you strike while you learn. For MIG and stick, a 9-13 shade range, four arc sensors, and 1/25,000-second switching speed will serve you well. Spend extra on two things only if they apply to you:
- You will try TIG. OSHA’s minimum shade for TIG below 150 A is 8, so look for welding shades that go down to 8. A helmet that bottoms out at shade 9 cannot go that light, so the Lincoln Viking 3350 (shade 5-13) is the one-helmet-for-everything pick.
- You want to see the joint clearly. A larger viewing area and a 1/1/1/1 optical rating make it easier to follow the puddle while your technique is still developing. The YesWelder LYG-M800HP gives the biggest window at a budget price; the Lincoln Viking 1840 gives 1/1/1/1 clarity through a smaller window.
If you are a weekend hobbyist welding MIG or stick, the Hobart 770890 or YesWelder LYG-M800HP is enough helmet. If you are a welding student, start with the Lincoln Viking 1840 or Viking 3350. The full review of each helmet is below; if you would rather have one helmet named outright than a shortlist, see The One Welding Helmet to Buy.
What Makes a Good Auto-Darkening Helmet
Not all auto-darkening helmets are created equal. Here is what separates a reliable helmet from one that will let you down.
Optical Clarity Rating
The EN379 standard rates helmet lenses on four criteria: optical class, diffusion of light, variation in luminous transmittance, and angle dependence. Each is rated 1 (best) to 3 (worst), displayed as a four-digit number like 1/1/1/1.
Top-tier helmets rate 1/1/1/1 or 1/1/1/2. The practical difference is how clearly you see the weld pool and surrounding joint. A 1/1/1/1 lens looks through clean glass. A 1/2/2/2 lens looks through a dirty windshield.
Spend the money on optical clarity. A clear view of the weld pool directly improves weld quality.
Switching Speed
When you strike an arc, the lens must darken from its resting state to the welding shade. Switching speed measures this transition. On this list, Lincoln, Miller and Hobart rate their helmets at 1/25,000 second, YesWelder rates the LYG-M800HP at under 1/30,000 second, and 3M rates the Speedglas G5-02 at 0.1 ms (+23°C). Check the published switching-speed spec before you buy.
For occasional MIG and stick welding, a slower-rated lens is usually adequate. For all-day welding or TIG work (where you are staring directly at the arc for extended periods), faster is better.
Number of Sensors
Auto-darkening helmets use light sensors to detect the arc. More sensors mean fewer blind spots. A single-sensor helmet may fail to trigger when welding inside a joint or at certain angles. Four sensors give more coverage, but a torch or hand can still block them; Miller’s X-Mode exists to detect the arc when sensors are blocked.
Minimum recommendation: 4 sensors for any serious welding work.
Shade Range
Standard welding shades range from 8 to 13, with higher numbers providing more darkening for higher-amperage processes. A shade range of 9-13 meets OSHA’s minimums for MIG, stick and TIG. OSHA’s minimum shade is 8 for TIG below 150 A and for light plasma cutting below 300 A where the arc is clearly seen (OSHA notes lighter filters may be used when the arc is hidden by the workpiece), and 10 for TIG at 150-500 A.
If you do any TIG welding below 150 A, a helmet whose welding shades go down to 8 lets you use OSHA’s minimum; one that only goes down to shade 9 cannot go that light. OSHA’s rule of thumb: start with a shade too dark to see the weld zone, then go lighter until you can see it, without going below the minimum.
Grind Mode
Many helmets include a grind mode that locks the lens at a light shade (2.5 on the Miller Digital Infinity and Viking 1840, 3 on the Hobart 770890, 3.5 on the Viking 3350) so you can use the helmet as a face shield for grinding without the lens darkening from sparks. This convenience eliminates swapping between a welding helmet and a separate grinding shield.
Buying a Welding Helmet as a Gift
A helmet is the welding gift people use every time they strike an arc, so match it to how they weld:
- For someone who welds everything: the Lincoln Viking 3350 handles every process from low-amp TIG to heavy stick.
- For a TIG welder: the Miller Digital Infinity keeps darkening reliably during low-amp TIG work.
- For a weekend hobbyist on MIG or stick: the Hobart 770890 is a dependable first helmet for MIG and stick, and the YesWelder LYG-M800HP is our budget pick with a large viewing area.
Before you buy, check that the helmet is marked to ANSI Z87.1 and that its shade range covers the process they use most.
For more gift ideas, see our gifts for welders guide, welding gifts by budget and last-minute welding gifts.
Detailed Reviews
1. Lincoln Viking 3350 — Best Overall Auto-Darkening Helmet
Get Lincoln Viking 3350Lincoln calls the Viking 3350 its top-of-the-line helmet series. The 4C lens technology delivers 1/1/1/1 optical clarity.
What stands out:
- 4C lens technology broadens the color range and hues seen in both light and dark states for a clear view of the base material, arc and puddle
- 12.5 square inch viewing area — significantly larger than standard helmet windows
- Shade range 5-13 covers everything from low-amp TIG to high-amp stick and gouging
- 1/25,000 second switching speed with four independent arc sensors
- External grind mode button — no need to remove the helmet to switch modes
- X6 Headgear with adjustable top head supports, a rotatable front headband, forward and backward adjustments and a quick-adjust ratchet, which Lincoln says distributes weight and optimizes balance
Limitations:
- At 22 oz, it is heavier than some competitors
- The outer cover lens is Lincoln’s KP2898-1 (4.5 x 5.25 in.), made for the VIKING 2450 and 3350 series
- Headgear comfort is subjective
Who it is for: The Viking 3350 is the right choice for welders who want top-tier optical clarity and a large viewing area without paying for the 3M Speedglas G5-02, which welding dealers list at $925 to $1,248. Lincoln lists it for stick, TIG, pulsed TIG, MIG, pulsed MIG, flux-cored, gouging and grinding, with a TIG rating of 2 amps and up (AC and DC). If you are buying one helmet to use for everything, this is the one. Lincoln gives an operating range of -10 to +55 °C (14 to 131 °F) and carries a California Prop 65 warning (cancer and reproductive harm).
2. Miller Digital Infinity — Best for TIG Welding
Get Miller Digital InfinityMiller’s Digital Infinity is purpose-built for welders who demand the clearest possible view of small weld pools. Its ClearLight lens technology and expanded shade range make it the top choice for TIG specialists, though it handles MIG and stick equally well.
What stands out:
- ClearLight lens provides natural color rendering with minimal distortion
- Shades 8-13 for welding and X-Mode, 5-8 for cutting and 2.5 for grinding
- 13.4 square inch viewing area
- InfoTrack 2.0 tracks and displays arc time and arc count
- X-Mode electromagnetic arc sensing responds to the electromagnetic field of the arc, not just visible light — eliminates sunlight interference and continuously detects the arc even if sensors are blocked
- 21.4 oz helmet weight
Limitations:
- Price premium over the Lincoln Viking 3350 ($280-350 vs $250-300); Miller rates the lens EN379 1/1/1/2, Lincoln rates the Viking 3350 1/1/1/1
- Headgear fit is personal (Miller ships it with its Legacy headgear) — try before you buy if possible
Who it is for: If TIG welding is your primary process, the Digital Infinity’s X-Mode sensing and TIG rating of 5 amps and below make it the standout choice. Miller says X-Mode electromagnetically senses the weld and continuously detects the arc even if the sensors are blocked. Also excellent for welders who frequently switch between welding and cutting/grinding.
3. 3M Speedglas G5-02 — Largest Viewing Area
Get 3m Speedglas G5 02The Speedglas G5-02 has 3M’s largest auto-darkening field of view ever, 150 x 76 mm. The curved lens design provides a panoramic view that reduces the tunnel vision effect common with standard helmets. 3M sells the G5-02 for industrial/occupational use only, not for consumer sale or use.
What stands out:
-
150 x 76 mm viewing area with curved lens — 3M’s largest auto-darkening field of view ever
-
Shade 2.5 resting state means exceptional visibility before striking the arc
-
3M Speedglas Natural Color Technology
-
Natural color rendering in both light and dark states
-
Premium comfort with balanced weight distribution
-
3M’s limits of use include: use for laser welding/cutting may result in permanent eye injury and vision loss; eye protectors worn over standard ophthalmic spectacles may transmit impacts, creating a hazard to the wearer; the helmet is heat resistant but can catch fire or melt in contact with open flames or very hot surfaces, so keep it clean to minimize this risk; operating conditions are -5°C to +55°C, RH ≤ 90%, non-condensing; only use original 3M spare parts and accessories listed in the reference leaflet and within the usage conditions in the technical specification, because substitute components, decals, paint or other modifications might seriously impair protection and may invalidate warranty claims or make the product noncompliant with protection classifications and approvals; cracked, pitted or scratched filter glass or protection plates may reduce vision and can seriously impair protection, so replace all damaged components immediately and make sure the filter has an outer/inner protection plate; to avoid damage, do not use solvents or alcohol for cleaning or disinfection, and do not immerse in water or spray directly with liquids
Limitations:
-
The most expensive option on this list: 3M publishes no price, and welding dealers list the 08-0100-50iC kit at $925 to $1,248 (more with the Adflo system)
-
The unique shade range (8-12) does not go as high as traditional helmets — not ideal for very high-amp gouging
-
3M states this welding helmet is not suitable for grinding operations
-
3M lists the helmet at 233 g, the welding filter at 202 g and the head band at 100 g
Who it is for: Professional welders who spend long days under the hood and need the widest possible field of view. If the filter fails to switch to the dark state in response to an arc, 3M says to stop welding immediately and inspect the welding filter as described in the instructions; continued use of a welding filter that fails to switch to the dark state may cause temporary vision loss, and if the problem cannot be identified and corrected, do not use the welding filter and contact your supervisor, distributor or 3M for assistance. The Speedglas G5-02 shines in production environments, pipe welding, and any situation where peripheral vision and comfort directly affect productivity and safety. 3M states it is not designed for overhead welding/cutting operations when there is a risk of burns from falling molten metal.
4. YesWelder LYG-M800HP — Best Budget Helmet
Get YesWelder LYG-M800HYesWelder sells the LYG-M800HP as the Classic Black design of its LYG-M800H helmet. Amazon lists the helmet as the LYG-M800H, so the buttons on this page search Amazon for that name. YesWelder’s large-window helmet has a 3.93 x 3.66 inch viewing area, and YesWelder rates the lens 1/1/1/1 optical clarity.
What stands out:
-
3.93 x 3.66 inch viewing area (3M lists the Speedglas G5-02 at 150 x 76 mm)
-
Four arc sensors with under 1/30,000 second response time
-
Light state shade 4, dark-state shades 5-9 and 9-13 for TIG, MIG, MMA and plasma, with a grinding feature
-
Comes with extra cover lenses included
-
Price point ($80-110) makes it accessible for students and hobbyists
Limitations:
- YesWelder rates the lens 1/1/1/1 optical clarity with a true color view
- Headgear: YesWelder warns that when adjusting the headgear, both sides must be put in a symmetrical position, or it will break down quickly
- Durability of the shell and internal components is unproven over multi-year professional use
Who it is for: Hobbyists, students, and budget-minded welders who want a large viewing area without the $250+ price tag. The M800HP is an excellent starter helmet and a solid backup for professionals. Do not expect premium-brand longevity, but the value per dollar is hard to beat. YesWelder gives a working temperature of 23-131°F.
5. Hobart 770890 — Budget Entry Point
Get Hobart 770890The Hobart 770890 is a no-frills, reliable auto-darkening helmet from a trusted brand. It does not have the largest viewing area or the widest shade range, but it does what a welding helmet needs to do — protect your eyes and darken consistently.
What stands out:
-
Four arc sensors and 1/25,000 second switching speed — matching helmets at twice the price
-
19.7 oz helmet weight
-
Simple controls: sensitivity knob, delay knob, shade selector (9-13)
-
Affordable replacement cover lenses
Limitations:
- 9.3 square inch viewing area
- Welding shades start at 9, though Hobart lists the helmet as low-amp TIG rated
- Grind mode prevents the lens from darkening for grinding (light state #3)
- Headgear: Hobart says it provides extensive adjustability
- Hobart states it meets ANSI Z87.1-2015, CSA and CE EN379
Who it is for: The Hobart 770890 is the right helmet if you are just starting MIG or stick welding and want a reliable brand without spending $200+. It is a perfectly functional helmet that will protect your eyes and darken reliably. Upgrade to a Lincoln Viking or Miller Digital when you are ready for a larger view.
6. Lincoln Viking 1840 — Mid-Range Value
Get Lincoln Viking 1840The Viking 1840 bridges the gap between budget helmets and the premium Viking 3350. It offers Lincoln’s build quality and 4C lens technology in a standard-size viewing window at a more accessible price.
What stands out:
- 4C lens technology (same as the 3350) delivers 1/1/1/1 optical clarity
- Four arc sensors with reliable switching performance
- Lincoln’s proven headgear design with good comfort and stability
- External grind mode control
- Shade range 7-13 covers MIG, stick and TIG
- Available in multiple graphic shell designs
Limitations:
- 3.78 x 1.85 in. viewing area — significantly smaller than the 3350’s 12.5 sq in
- Shade range starts at 7 (Lincoln’s TIG rating: DC > 2 amp, AC > 5 amp)
- The price gap to the 3350 is only $100-150, making the upgrade tempting
- Outer cover lens is Lincoln’s KP3043-1, shared with the 1740 series
Who it is for: MIG and stick welders who want Lincoln’s superior optical quality without the full 3350 price. If you do not need the large viewing area and shade 5 capability, the 1840 delivers the same crystal-clear lens technology for less. A solid mid-range choice. Lincoln gives an operating range of -10 °C to +55 °C (14 °F to 131 °F).
How to Choose the Right Helmet
By Welding Process
MIG and stick only: Any helmet with shade 9-13, four sensors, and 1/25,000 second switching speed will serve you well. The Hobart 770890 or Lincoln Viking 1840 are cost-effective options. The Lincoln Viking 3350 is the sweet spot if budget allows.
TIG welding included: OSHA’s minimum shade for TIG is 8 below 150 A, so look for welding shades that go down to 8. The Miller Digital Infinity is the top pick for TIG-focused work. The Lincoln Viking 3350 (shade 5-13) is the best all-rounder.
All processes + grinding: Look for integrated grind mode. The Lincoln Viking 3350 has an external grind button; the Miller Digital Infinity has a Grind mode among its four operating modes, set with its digital controls.
By Budget
| Budget | Recommendation |
|---|---|
| Under $100 | YesWelder LYG-M800HP |
| $60-80 | Hobart 770890 |
| $100-150 | Lincoln Viking 1840 |
| $250-350 | Lincoln Viking 3350 or Miller Digital Infinity |
| $925-1,248 | 3M Speedglas G5-02 |
By Use Case
- Weekend hobbyist: YesWelder M800HP or Hobart 770890
- Welding student: Lincoln Viking 1840 or Viking 3350
- Professional — general fabrication: Lincoln Viking 3350
- Professional — TIG specialist: Miller Digital Infinity
- Professional — production/pipe: 3M Speedglas G5-02
Helmet Care and Maintenance
A well-maintained helmet lasts years. Neglect it, and you are replacing lenses constantly and dealing with inconsistent performance.
Cover Lens Replacement
The outer clear cover lens protects the auto-darkening cartridge from spatter, scratches, and grinding debris. Replace it when visibility degrades — this is a cheap fix ($2-5 per lens) that most welders put off too long. Keep spares in your welding cart.
The inner cover lens (between the cartridge and your face) protects from the inside. Replace it when scratched or fogged.
Sensor Cleaning
Dirty sensors cause slow or inconsistent darkening. Wipe them regularly with a clean, dry cloth. If sensors are recessed, use compressed air to clear debris.
Headgear Adjustment
An improperly adjusted helmet causes neck strain, falls forward during overhead work, and distracts from the weld. Spend five minutes getting the fit right — the crown height, tilt angle, and tightness all matter.
Battery and Solar Panel
Most auto-darkening helmets use a combination of solar cells and a lithium battery. The solar cells sustain power during welding; the battery handles startup and low-light conditions. Replace the battery when the low-battery indicator comes on (Miller, Hobart and Lincoln list one on the Digital Infinity, 770890 and Viking 1840); 3M rates the Speedglas G5-02 battery at 1500 hours. Some helmets (like the Lincoln Viking 3350) have replaceable CR2450 batteries. Others require cartridge replacement.
Best Auto-Darkening Helmet for Visibility
When you can see more, you weld better. Three things set how much you see through a helmet. The first is lens tint. Older auto-darkening filters give everything a lime-green cast. True-color lenses filter more evenly, so the base metal, the puddle edge and soapstone marks look closer to their real colors. The second is the light state, which is how dark the lens stays before you strike an arc. A lens that rests at 2.5 or 3 is easier to see through while you position the torch than one that rests at shade 4. The third is the shape and size of the window. Brands give their true-color lenses their own names. Lincoln calls its version 4C on the Viking 3350 and rates it 1/1/1/1. Miller calls its version ClearLight 4x on the current Digital Infinity, and the spec sheet gives that lens an EN379 rating of 1/1/1/2.
The 3M Speedglas G5-02 uses a curved auto-darkening filter instead of a flat one. The glass wraps toward your temples, so the edges of the joint stay in view when your head is close to the work, as in TIG. If you mostly weld out of position or in tight corners, a curved or extra-large window matters more than an extra point on the clarity rating. For heavy overhead welding where molten metal can fall, 3M warns that severe burns may result with the G5-02, so it is not the pick for that work. If you weld flat on a bench, a 1/1/1/1 true-color lens in a mid-size window gives you most of the benefit.
Get Lincoln Viking 3350 Get 3M Speedglas G5-02Choosing the Best Auto-Darkening Welding Lens
You can buy the auto-darkening lens without buying a whole helmet in two situations. One is upgrading a passive helmet with a fixed shade. The other is replacing a filter that died in a helmet you like.
- Upgrading a passive hood: many fixed-shade helmets take a rectangular filter in the 2 x 4-1/4 inch size, and drop-in auto-darkening cartridges are made in that size. Measure the plate your helmet holds now and check its depth before you buy. A cartridge that is too thick will not latch in the holder. These drop-in filters usually have fewer adjustments than a built-in lens, so look for a variable shade and a sensitivity control if you weld TIG.
- Replacing a branded helmet’s filter: cartridges on the Viking, Digital Infinity and Speedglas lines are made for their own shells, mounts and control panels. Find the replacement part number in the helmet’s manual, or on the label on the back of the cartridge, and order by that number. A filter from a similar-looking model in the same family may not fit.
- Before replacing a lens that seems to be failing: check for a pitted outside cover lens, a scratched inside cover lens or a weak battery first. Cover lenses are the cheap wear part (Lincoln’s KP2898-1 carries a California Prop 65 warning for cancer and reproductive harm). Spatter pits the outer one, and a hazy view through it is easy to mistake for a poor filter.
Reading Auto-Darkening Helmet Reviews
Knowing what causes each of the failures below helps you judge whether a review applies to how you weld.
- Flashes or missed darkening on TIG: a low-amperage TIG arc gives off little light, and the torch or your hand can block a sensor. Look for a published TIG amperage rating and an adjustable sensitivity control. Miller rates the Digital Infinity for TIG at 5 amps and below. Its X-Mode senses the arc electromagnetically, so the lens stays dark when a sensor is blocked.
- Darkening when nobody is welding: sunlight, a nearby welder’s arc or shop lighting can set off a sensitive lens. Check the sensitivity setting first. A review that blames the helmet without mentioning the setting tells you little.
- A bright flash when the arc stops: the delay setting controls how long the lens stays dark after the arc ends. If the delay is too short, you see the glowing metal at full brightness, which matters most after high-amperage stick welding.
- Dying after a year or two: this can be the battery or a dirty solar cell rather than the electronics. Check the manual to see whether the battery can be replaced and which size it takes.
Give more weight to reviews that name the process and amperage the reviewer welds, and to reviews written after months of use rather than on day one. Whatever the reviews say, check that the lens is marked to ANSI Z87.1 before you trust it.
Get Miller Digital InfinityFrequently Asked Questions
Are cheap auto-darkening helmets safe?
Yes, if they meet ANSI Z87.1 and carry proper EN379 ratings. Even budget helmets provide UV/IR protection in both light and dark states — the lens blocks harmful radiation regardless of whether the auto-darkening function activates. However, cheap helmets may have slower switching speeds and lower optical clarity, which affect comfort and weld quality. A lens that fails to darken is a safety problem: 3M says to stop welding immediately and inspect the welding filter as described in the instructions, because continued use of a welding filter that fails to switch to the dark state may cause temporary vision loss; if the problem cannot be identified and corrected, do not use the welding filter and contact your supervisor, distributor or 3M for assistance.
How long do auto-darkening helmets last?
3M gives the Speedglas G5-02 an expected service life of 5 years depending on conditions of use. The auto-darkening cartridge may need replacement before the shell wears out.
Can I use a MIG helmet for TIG welding?
Only if the shade range goes low enough. OSHA’s minimum shade for TIG is 8 below 150 A and 10 from 150 to 500 A, so a MIG/stick helmet that goes down to 8 or 9 meets those minimums. If the lens is too dark, you will not see the weld pool and your welds will suffer.
What shade should I use for MIG welding?
OSHA’s minimum for MIG and flux-cored welding is shade 7 below 60 A and shade 10 from 60 to 500 A. OSHA’s rule of thumb: start with a shade too dark to see the weld zone, then go lighter until you can see it, without going below the minimum. If you are squinting, go lighter. If your eyes feel strained after welding, go darker.
Do I need a respirator with my welding helmet?
Welding produces harmful fumes, especially when welding stainless steel, galvanized metal, or using flux-core wire. A welding helmet alone does not protect against fumes; 3M states the Speedglas G5-02 is not a respirator: welding may produce high levels of welding fume or other airborne contaminants which may exceed the Workplace Exposure Limit (WEL). As a result, 3M says users and their employer must determine the expected hazards and, if needed, select appropriate respiratory protection; properly selected, used and maintained respirators in a full respiratory protection program help protect against certain airborne contaminants by reducing airborne concentrations in the wearer’s breathing zone below the WEL, and failure to use respirators or misuse of respirators may result in overexposure to contaminants and lead to sickness or death. See our best welding respirators guide for detailed recommendations.
Final Verdict
The Lincoln Viking 3350 is our top overall recommendation. Its combination of 4C optical clarity, large viewing area, wide shade range, and reasonable price makes it the best all-purpose welding helmet available. TIG welders should strongly consider the Miller Digital Infinity for its X-Mode sensing. And for budget-conscious beginners, the YesWelder LYG-M800HP offers remarkable value.
Your helmet is the piece of equipment you interact with every second you are welding. Invest in the best one your budget allows — your eyes, your comfort, and your weld quality will all benefit.
Related Articles
- Best Auto-Darkening Helmets Under $200 — budget-focused helmet roundup
- Best Welding Helmets Under $100 — entry-level options for beginners
- Welding Safety Gear Guide — the complete guide to welding PPE
- Best Welding Respirators — pair your helmet with proper fume protection
- Best Welding Gloves — process-matched gloves for MIG, TIG, and stick